Home About us Products Contact us Feedback Search Set home Favorite Mail
Products Catalogue
 Engines
 Helicopter Blades
 Propeller
 Spinners
 Landing Gear / Air Retracts
 Tail Wheel Mounts
 Engine Mounts
 Covering film
 fuel tanks
 wheels
 horns
 Hinges
 Strap Plates/Clevises/Strapers
 tubes & Shafts
 Rods & Steel wires
 metal Parts
 Screws
 Transmitter/Simulator
 Motors
 speed controllers
 Servo
 Receivers
 Battery
 Chargers & Adaptors
 Ducted Fan Units
 Glue/adhesive
 Rubbers
 wood
 Tools
 Lipo Safe Bags
 Leads & Wires
 Pilot Statues
 Skateboard
 Magic Tape
 Products Search
 Ms.Liu
 Tel
Mail
   Products Showroom Home - Products Showroom - Product Introduction    



click to enlarge
  Name£º DC Professional Charger & Discharger
  Model£º FM31-20
 
  Contact MSN£º Ms.Liu
 Related Products
 Intelligent Balance Charger
 Detail
 DC Professional Charger & Discharger
 Detail
 AC/DC Professional Charger & Discharger
 Detail
 DC Li-Po & LiFePo Balance Charger
 Detail
 Product Introduction

Type: FM31-201

Description:
SPECFICATION :
Input : DC 11-18V
Battery Type : Ni-Cd / Ni-MH / Li-Po / LiFePo / Pb
Battery Cell :
                 Ni-Cd / Ni-MH : 1-14 Cell packs (1.2-16.8V)
                 Li-Po : 1-6 Cell packs (3.7 -22.2V)
                 LiFePo : 1-6 Cell packs (3.2-19.2V)
                 Pb : 2V, 6V, 12V
Charge Rate : 0.1A - 5.0A (0.1A Per gradation)
Discharge Rate : 0.1A - 2.0A (0.1A Per gradation)
Charging Capacity : 1- 9900mAH
Safety Timer : 10 - 720 mins or OFF
Trickle Charge Rate : 0.05 - 0.2A or OFF
Peak Sensitivity (- delta V) : 0 - 15mV

Character:
1. Super function 5 in 1,16-bit microchip CPU controller.
2. Built-in system temperature detection protection with additional battery temperature sensor option ( extra option item no.2714)
3. DC input only and could set low voltage 11V.Under 11 V, it will stop working.
4. Built-in Li-Po / LiFePo balance charging with requested connectors
5. Automatic accidental battery inversion detection and reverse input protection.
6. Memory function for charging and discharging parameters.
7. All-aluminum streamline casing design-tough, compact and portable.
8. Large Two-line, 16 characters dot matrix LCD display.
9. Banana plug, it's very convenient for using.
10. 10 tone selectable beep function with volume control.
11. Built-in DC cooling fan.


Home|About us|Product| Feedback|Contact us| Set home
Company:Fly-Model factory
E-mail:flymodelworld2008@yahoo.com.cn MSN:liumei791118@hotmail.com
Address:NO1.9TH Building, Gaoxin Rd,Yongkang city,zhejiang,China
Phone: 0086-579-87533696, Fax: 0086-579-87533690
Copyright?Fly-Model factory All Rights Reserved